0
Plotting problem

Hello, I' a very SciLab begginer and I have a problem with plotting data I've acuired thanks to my code made in SciNotes.

The thing to visualise is the scope of correct work of RFID identificator in reference to an RFID read/write device.
I have calculated scope of proper work according to 3 variables:
1.RFID id distance from RFID read/write device's antenna (0:8 meters)

2.RFID read/write device's antenna angle in horizontal axis (0:50 degrees);

3.RFID read/write device's antenna vertical axis height (1:3.5 meters);

I put my calculations in a while loop (dependent on antenna highness) which starts with 1m and iterates 0.25m interval in every lap.

The output matrixes contain results like below:


for h=3m:
0.5 1. 1.5 2. 2.5 3. 3.5 4. 4.5 5. 5.5 6. 6.5 7. 7.5 8. <----those are x (distance from antenna)
0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.
5. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.
10. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.
15. 0. 0. 0. 0. 0. 0. 0. 0. 1. 1. 0. 0. 0. 0. 0. 0.
20. 0. 0. 0. 0. 0. 0. 0. 1. 1. 1. 1. 0. 0. 0. 0. 0.
25. 0. 0. 0. 0. 0. 0. 1. 1. 1. 1. 1. 0. 0. 0. 0. 0.
30. 0. 0. 0. 0. 0. 0. 1. 1. 1. 1. 1. 0. 0. 0. 0. 0.
35. 0. 0. 0. 0. 0. 1. 1. 1. 1. 1. 0. 0. 0. 0. 0. 0.
40. 0. 0. 0. 0. 0. 1. 1. 1. 1. 0. 0. 0. 0. 0. 0. 0.
45. 0. 0. 0. 0. 0. 1. 1. 1. 0. 0. 0. 0. 0. 0. 0. 0.
50. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0.

^ those are angles of antenna

the 1 numbers represent scope of correct work of the system.

if I see a "1" in a table, i can say that the for this x and this angle, the system works correct.

My question is, how can I visualise those calculations on a one graph.
As for this moment I imagine it as separate 3d surface for every single h, one above another, but I can't really implement that in my code.

Could anyone give me some tips?

Thanks in advance.


Scilab 07-06-19, 9:28 p.m. minio373

Log-in to answer to this question.