0
python plotting error and global label error

PYTHON PLOTTING ERROR "Error while opening plotting editor. Please look at the console for more details" appears whenever I opt for simulation.

GLOBAL LABEL ERROR Using global label in schematic shows error in ERC as"Global label not common to any other global level"
NGSPICE ERROR Using command "plot v(out)" shows "no such vector out"even though I use a global label 'out' for a node(selecting it as output)
please give me solutions as soon as possible.


eSim 15-12-17, 11:24 a.m. Vignesh
0
Hello Vignesh,
Make sure you have given proper values for analysis.
Incorrect values will lead to such errors.
And also when you connect a global variable, a junction will be placed on the wire to ensure proper connection.
15-12-17, 11:36 a.m. Gloria
I have given the exact values to the circuit elements. Also i have used a junction while connecting a global label. Same error persists.What can i do to get Python plot ?


15-12-17, 11:41 a.m. Vignesh
send   .cir.out file to contact-esim@fossee.in

15-12-17, 11:44 a.m. Gloria
or paste your .cir file here.. We can have a look

15-12-17, 11:55 a.m. Gloria
There is no voltage component added .  What input source you are giving?

15-12-17, 12:19 p.m. Gloria
My circuit consists of 2 parts. The first part creates square wave , which is fed as an input to the integrator part to obtain saw tooth wave as an output.So there is no need of having a separate voltage source.

15-12-17, 12:27 p.m. Vignesh
Are you giving any feedback from second opamp to first one(so that it can behave as an oscillator, which does not require input signal). How will you get a square wave at the output of 1st opamp? 

15-12-17, 12:51 p.m. Gloria
First opamp is a Schmitt circuit and 2nd opamp is an integrator.For clarifications visit. https://www.google.co.in/url?sa=t&source=web&rct=j&url=https://www.allsyllabus.com/aj/note/ECE/LINEAR_ICs_and_APPLICATIONS/unit5/SAW-TOOTH%2520WAVE%2520GENERATOR.php&ved=2ahUKEwiPrenxgobYAhUIRY8KHQ_mDXsQFjAiegQIARAB&usg=AOvVaw03tuc6s_BMf7yrAMonBEIB

15-12-17, 1:07 p.m. Vignesh
Check the value of capacitor


15-12-17, 1:09 p.m. Gloria
Even when I use 0.1u or 0.1 or 0.1n no change occurs.

15-12-17, 1:28 p.m. Vignesh
With reference to the .cir file sent,Please tell me the alterations that I can make to get clear output via Python or ngspice plot 

15-12-17, 2:30 p.m. Vignesh
Hello Vignesh,
I am getting ramp, but you need to change design values to get proper output.
 I have sent the attached image to your mail id.

15-12-17, 3:07 p.m. Gloria
Have you made any change in the .cir file that I sent you. Still I am not getting the output in ngspice .

15-12-17, 3:22 p.m. Vignesh
No, i did the circuit at eSim and got the output. Due to the design parameters, i.e, value of R and C you will not get exact ramp. So you need to choose the proper values. I added Subckt path for ua741 and D.lib path library for diode.



15-12-17, 3:27 p.m. Gloria
Even after adding subckt, lib paths ,  the same error "No such vector out" displayed in ngspice comm.window (after giving the command ,plot v(out)

15-12-17, 3:41 p.m. Vignesh
I think, you are missing some connection. Send me snap shot of you schematic.

15-12-17, 4:09 p.m. Gloria
You need to use Gnd as ground. You also need to use plot_v from eSim plot to see the output. That is what I was mentioning about . you need to have  voltage source. you place plot_v along with the global variables for both outputs.


15-12-17, 4:35 p.m. Gloria
Ignore the global variable error.

18-12-17, 12:08 p.m. Gloria

Login to add comment

0
Owing to the fact that computers are today used in almost all fields, computer science is an area of study that is recommended to students from an early stage. This means that it is subject that cuts across all areas. By relying on our services, you can always be sure of the best help with computer science essay assignments at every stage of your education and get online assignment help with the help of our service.
10-07-22, 3:15 p.m. TomGould

Login to add comment

0
Hello there! I am a newbie on this forum. I am looking for a writer who is ready to write a speech for me. I have prepared some notes that can be added in a speech. Thanks in advance!
29-09-22, 10:07 p.m. jenahopkins

Login to add comment

Log-in to answer to this question.