1
Problem in opening the schematic window after double clicking the esim icon.

After installation, Schematic window is not opening. only it shows the terminal window. after a few seconds, automatically that window also gets closed. Kindly give me the solution. I have also installed the esim software multiple times. I am using windows 7.


eSim 15-11-17, 3:22 p.m. kksundari_581169

Answers:

0

Hello,

Please try to reinstall the eSim package. You can also follow the eSim tutorials on ,"Getting started with eSim Windows Installation".
Kindly find the url below:
If still the problem exists, then go to :
Src folder in eSim-->frontend-->run Application.py
Regards,
Gloria N

15-11-17, 3:38 p.m. Gloria


0

Hello mam,

I use the same link during 2nd installation. But it also shows the same problem. I tried now to run application.py in frontend folder. There is no change.

15-11-17, 4:59 p.m. kksundari_581169

Hello,


Did eSim got installed properly on Windows or still there is an issue. 
Let me know.

Regards,
Gloria N


25-11-17, 11:49 a.m. Gloria

Login to add comment


0

Hello,

I tried to Install on windows 7. It is getting installed. There were no issues. You will get following messages, when you run the setup file as administrator.
Installing Python,
Installingpyqt4

Installingmatplotlib

Installingnumpy

Installingkicad

Then you need to run(open) the Application.py. The eSIm window will open.

Go through the instruction sheet of installing on windows in Esim website.

The url is:http://esim.fossee.in/esim_on_windows

Regards,

Gloria N

15-11-17, 8:30 p.m. Gloria


0

Hello,

Sometimes due to antivirus, eSim may not get install.
So, disable it during eSim installation.
Then run eSim as administrator.
Once installed, run Application.py
Or use the command python Application.py
Let me know the results.
Regards,
Gloria N

27-11-17, 3:43 p.m. Gloria


Log-in to answer to this question.