0
R_Variable value in simulation

I am trying to find the load regulation using zener diode for this i need variable load resistance. i have added a device R_variable but i am find difficult to add value and do the simulation.

Please suggest any workable soultuion to find the variable R during simuation

Thanks


eSim 26-09-21, 9:58 p.m. tkrudresh
0

Dear Tkrudresh,

Sorry for the delayed response due to technical problems. Please use the normal eSim_diode ONLY. In the KiCad to Ngspice conversion tab, add the model file for the Zener diode. It will work fine.

For changing the Resistance value, right-click on the resistor->Edit Component-> Value->Give the desired value of the resistor, e.g. 1k->Click on OK button.

Please see the Spoken Tutorial videos to understand circuit simulation in eSim: https://spoken-tutorial.org/tutorial-search/?search_foss=eSim&search_language=English

Please feel free to ask if any doubts.

You may contact us by visiting the link given here: https://esim.fossee.in/contact-us

Regards,
Sumanto Kar
eSim Team

31-12-22, 11:23 a.m. Sumanto


0
The diagram you draw is quite detailed, and I will add some equipment to upgrade it. drift boss
05-01-23, 12:22 p.m. danielusa0106


Log-in to answer to this question.