eSim - Mapping components footprints

Mapping components footprints

what is the component footprint of adc_bridge, d_jkff and d_and

eSim 02-11-19, 10:32 p.m. Aman_M

This question shows research effort; it is useful and clear

This question does not show any research effort; it is not useful and unclear

There is none. adc_bridge, d_jkff and d_and are hybrid/digital components only used for simulation purposes. In real life implementation, you will have to use ICs on the board consisting the above hybrid/digital components. Check the datasheet of 7408, SN54HC109-SP and ADS7952SBDBT and check the footprint listed in there

04-11-19, 10:08 a.m. Saurabhb17

Many CAD programs come prepackaged with multiple libraries with common electronic components, which include schematic symbols, footprints, and 3D models. These common components can be placed directly in your schematic and layout, and they include all electrical connections and pads for a component. https://jiofilocalhtml.run https://forpc.onl

03-10-20, 5:36 p.m. xpacetwo

Their is no component footprint of adc_bridge, d_jkff and d_and.

16-02-21, 7:55 p.m. rareskyone

and there's not supposed to be one. logic gates when to be used in circuits will have to be used in terms of ICs which has multiple of these logic gates. For eg, if you wish to use AND gate somewhere in your circuit, you will need an ADC IC like ADC0804 by Texas Instruments and a 7408 or similar ICs for your AND gate usage. Same logic for other gates and flip-flops

17-02-21, 12:30 a.m. Saurabhb17

Log-in to answer to this question.