eSim - Electrical Rule Check

Electrical Rule Check

During ERC the error type, Pin connected to some other pins, but no other pins to drive it. Kindly respond as soon as possible

eSim 20-09-19, 12:35 p.m. Devibhagavathi

This question shows research effort; it is useful and clear

This question does not show any research effort; it is not useful and unclear

1. Make sure you are using eSim of the latest version(release date 30 August).

2. In order to remove the "Pin connected to some other pins but no pin to drive it" warning, please add a power flag "PWR_FLAG" and connect it to the ground. Global label warnings can be ignored as mentioned in the spoken tutorials.

20-09-19, 1:57 p.m. Saurabhb17

1. Where can i get the latest version.

2. I connected the power flag to the ground, still it is showing conflict error.

Kindly respond asap.

20-09-19, 2:01 p.m. Devibhagavathi

You are definitely using the older version. You can get the latest one from https://esim.fossee.in/downloads
If you are trying the simulation of astable multivibrator, we created a tutorial for it which is available at https://spoken-tutorial.org/watch/eSim/Simulating+an+Astable+Multivibrator/English along with code-files.

20-09-19, 2:22 p.m. Saurabhb17

Log-in to answer to this question.