0
error , not able to see source details

* /home/esim/eSim-Workspace/astable_1529/astable_1529.cir

* EESchema Netlist Version 1.1 (Spice format) creation date: Sat Jul 27 14:09:09 2019

* To exclude a component from the Spice Netlist add [Spice_Netlist_Enabled] user FIELD set to: N
* To reorder the component spice node sequence add [Spice_Node_Sequence] user FIELD and define sequence: 2,1,0

* Sheet Name: /
R1 Vin Net-_D1-Pad2_ 1K
R3 Vin Net-_22u1-Pad2_ R
R4 Vin Net-_22u2-Pad2_ R
R2 Vin Net-_D2-Pad2_ 1K
D2 out2 Net-_D2-Pad2_ LED2
D1 out1 Net-_D1-Pad2_ LED1
Q2 out2 Net-_22u1-Pad2_ GND eSim_NPN
Q1 out1 Net-_22u2-Pad2_ GND eSim_NPN
DC1 Vin GND 9
U2 Vin plot_v1
U3 out2 plot_v1
U1 out1 plot_v1
22u1 out1 Net-_22u1-Pad2_ eSim_CP1
22u2 out2 Net-_22u2-Pad2_ eSim_CP1

.end


eSim 27-07-19, 2:17 p.m. sesidhar

Answers:

0

You are not able to see the source details in the kicadngspice tool because you have already defined the voltage source value in the schematic.

Couple more corrections:

1) There is no value assigned for R3 and R4

2) Instead of assigning values to the capacitors, you have changed the name of the capacitors.

Please refer to the spoken tutorial " Schematic Creation and Simulation" to see how to make above mentioned changes.

27-07-19, 9:41 p.m. Saurabhb17


Log-in to answer to this question.