0
LM_741 is not available in eSim_Subckt filter

Dear Members

I have no LM_741 IC option in eSim_Subckt, therefore i have usded an another option as Linear Circuits and here was LM 741 but if i am using it then after a complete schematic design, i am not able to Convert "kicad" to Ngspice..?

Kindly suggest suitable options so that i could got the results.


eSim 05-07-19, 9:39 a.m. bvsjaipur
0

Hello, please download and install the latest updated installer from the https://esim.fossee.in/downloads , Lm_741 is available in there

05-07-19, 9:47 a.m. Saurabhb17
Nothing is available there, why you are suggesting indirectly to beginners?
When i follow https://esim.fossee.in/downloads....then again installers are there, why you suggested LM_741 is available there..?
suggest in proper way.

05-07-19, 10:08 a.m. bvsjaipur
Sir, if you download and install the latest installer given in the link above, you will find the lm_741 under eSim_Subckt

05-07-19, 10:11 a.m. Saurabhb17
I AM UNABLE TO INSTALL RECENTLY ADDED INSTALLER OF eSim on Windows10 of 32 bit size.

05-07-19, 2:05 p.m. bvsjaipur
Could you please post the error you received?

05-07-19, 2:25 p.m. Saurabhb17

Login to add comment

0

Hello,

Please download the installer(check for the release date). If you are finding the assignment so difficult, refer the inverter example present under examples folder of eSim-1.1.2. However, we are not concentrating on simulation. We want each faculty to generate the netlist for PCB design. The UA741 has 3 pins, whereas the newly added LM741 has 8 pins so that you can easily map to the footprint of 8 pins.

05-07-19, 10:18 a.m. Gloria
i am not using UA741, LM 741 is also available in....> place..>Components...>Linear..>LM 741
its also an 8 in DIP op-amp Chip sir ji

05-07-19, 10:29 a.m. bvsjaipur
Then please carry on the PCB design with the one available with you. You can skip the simulation part

05-07-19, 10:31 a.m. Saurabhb17

Login to add comment

Log-in to answer to this question.